Install offset pulley
on the transmission.
Nut has reversed tread.
Nut has reversed tread.
Install lock plate.
CMH wiring kit /top motor mount comes assembled ready to connect.
Drill
a 3/8 inch hole in frame plate to line up with the motor mount. Install & tighten
a 3/8" bolt.
Inside
battery box mounted.
w/ breakers.
w/ breakers.
Battery installed..
Wiring on a
Rigid frame runs threw the top rail. Drill two small holes directly
above the top engine plate. One for the H4 and one for the wiring
in our kit.
The wires on
a Rigid exit threw the lower tube where the breakers are mounted
to the upper
left engine mount on the trans.
